Q. Is there an easy way to increase low water pressure?

A. Possibly. Though there are many potential reasons for low water pressure, including lack of pressure at your main water supply; old pipe-work such as lead or galvanized pipes; perhaps your main stop isn't fully open; or if you're experiencing lower water pressure at one source, perhaps your water valve is low-flow, which means it isn't designed to give the amount of pressure you want. Also, consider adding a pressure booster to your current system. This device is designed to provide stronger, more even water pressure.

Q. Why does my well pump come on when I turn on my water?

A. A water-logged well tank or a well tank with a bad "bladder" is likely the cause. Consider changing the tank or having it purged. However, even by purging it, there's no guarantee your tank will work properly. Consult a professional and consider a complete "change out."

Q. How come my pump runs even when I'm not using my water and sometimes even after I turn it off?

A. The most probable cause is a hole in the well line or a bad valve. To find out, turn off the main water valve and if you lose pressure, you have a leak in your outside pump. On the other hand, if you hear a rush of water when you turn the valve back on, the leak resides indoors. And keep in mind, if the problem is not fixed, your pump will burn out.

Q. Is it okay if my water pulsates while I'm using it?

A. Your water is probably pulsating as a result of a clogged pump, which forces it to continually start and stop. And it's not okay; your pump will burn itself out if the problem is not addressed.

Q. When adjusting the temperature of the water in the shower, it becomes either really hot or really cold...not to mention it takes forever to warm up when I first turn it on. Is there anything I can do?

A. To keep your water temperature from fluctuating, check your thermostat to ensure it isn't set too high, or isn't out of calibration. Also, consider a replacement shower valve- today's models are not only efficient, but plumbing code stipulates shower valves must be pressure-balanced to include anti-scald protection. And for instant hot water, consider adding a re-circulating pump to your current water heater- this component is designed to keep water circulating in your pipes, which also helps conserve water.